Wireless Access: Laptops

Printer-friendly versionPrinter-friendly versionPDF versionPDF version

About the Campus Wireless Network

Users with laptops can connect to the University of Toronto campus wireless network (UTORcwn). There are two UTORcwns available to the U of T community: UofT and UTORwin (January 2014 - no longer available). These are the only two service set identifications at U of T.

For coverage maps and to check current wireless status, visit UTORcwn.

See Also:
Connecting to the Internet using Mobile Devices (e.g. iPad, Blackberry, and etc.), through UofT.

It is likely that your wireless device might detect various networks with similar names to the UTORcwn. Any network that can accept connections without prompting you for a password is not part of the UTORcwn and is not supported by the library.

Rules Regarding Wireless Usage

Usage of UTORcwn is subject to all existing policies for the appropriate use of information technology.

Before Accessing U of T’s Wireless networks

Before you attempt to connect to the wireless network, please make sure that you follow these steps. This is applicable to all users:

  1. Check your eligibility: only U of T students, staff and faculty are able to use the UTORcwn.
  2. Verify your UTORid. You will need it along with a valid password to access the network.

Connecting to UofT

Windows 8:

  1. Verify your UTORid. You will need it along with a valid password to access the network.
  2. Ensure that the wireless device on your laptop is turned on and enabled.
  3. Click on the wireless icon from the desktop.
  4. Choose UofT and click Connect.step three
  5. Type your UTORid and password in the appropriate fields. Click OK.
    step four
  6. If you see a warning message, click Connect.step five
  7. Once you are connected, right-click UofT and select View connection properties.
    step 6
  8. Click Advanced settings.
  9. Place a checkmark beside Specify authentication mode and choose User authentication from the drop-down menu. Click Save credentials and then OK .step 8
  10. Type your UTORid and password in the appropriate fields. Click OK.
    step 9

Windows 7:

  1. Verify your UTORid. You will need it along with a valid password to access the network.
  2. Ensure that the wireless device on your laptop is turned on and enabled.
  3. Click on the wireless icon in the bottom right-hand corner of the desktop.
    step 3
  4. Under Wireless Network Connection, click UofT and then click Connect.
    step 4
  5. A dialogue window will appear. Enter your UTORid and password and click OK.
    step 5
  6. If you a warning message appears on the desktop, click Connect. step 6

Mac OS X 10.5 and 10.6

  1. Verify your UTORid. You will need it along with a valid password to access the network.
  2. Click the wireless network icon in top right corner to make sure that AirPort is turned on. If not, select Turn Airport On. step 1
  3. Click on the drop-down menu in the top right corner of the desktop and select UofT.
    step 2
  4. An authentication window, prompting you for your UTORid and password will appear. Enter the necessary information and under 802.1X, select Automatic. Place a check mark beside Remember this network and click OK.
    step 3

Eduroam

Researchers from other universities are required to set up their credentials at their home institution prior to travelling to the University of Toronto.

Instructions for connecting at other universities:

Eduroam may be available at other institutions. Please check their web sites or contact local information technology service.

The following instructions apply only to U of T users who will be travelling to other universities:

Windows 7:

  1. Verify your UTORid. You will need it along with a valid password to access the network.
  2. Ensure that the wireless device on your laptop is turned on and enabled.
  3. Click on the wireless icon in the bottom right-hand corner of the desktop.
    step 3
  4. Under Wireless Network Connection, click eduroam and then click Connect.
  5. A dialogue window will appear. Enter your User name as utorid [at] utoronto [dot] ca (where “utorid” is your actual UTORid), and your UTORid password. Click OK.
    step 5
  6. If you a warning message appears on the desktop, click Connect. step 6

Endpoint Security Policy Test

Running the ESP test is no longer required to connect to the UTORcwn.

Supported Wi-Fi Standards

  • 802.11b
  • 802.11g
  • 802.11a
  • 802.11n

Signal Strength

Like all wireless networks, radio strength for the CWN is not uniform across campus. If you experience slow or unreliable connection, please relocate closer to a Wi-Fi hotspot.

Technical Support

If you require technical assistance at any step of connecting to the network, please consult our staff at the IT Support Desk.

Last updated: June 26, 2014

Staff Login (library)

Copyright © 2014 Victoria University Library. All Rights Reserved. Also find us on: Facebook logo